cartaway

Cart-Away Concrete Mixing System

Ready-mix concrete available in formulations for sidewalks or driveways
Mixed in 1/4 yard increments, up to 1 cu yd

electric

Electric 2-Bag Cement Mixer

Maximum capacity of 2 bags
Mixer is 24″ wide
$35/day

Electric 3-Bag Cement Mixer

Maximum capacity of 3 bags
$37/day

14 k970

Husqvarna K970 14″ Gas Cut-Off Saw

Sturdy, reliable, light and powerful – the K 970 power cutter is ready to perform when you are. The ultimate choice when you need an all-round cutter performing in the toughest conditions.
14″ blade diameter allows cutting to approximately 5″ depth.
$50/4 HOURS, $75/DAY
Blade rental $14.50/day plus usage

16 k970

Husqvarna K970 16″ Gas Cut-Off Saw

Sturdy, reliable, light and powerful – the K 970 power cutter is ready to perform when you are. The ultimate choice when you need an all-round cutter performing in the toughest conditions.
16″ blade diameter allows cutting to approximately 6″ depth.
$60/4 HOURS, $90/DAY
Blade rental $14.50/day plus usage

walk behind saw

Husqvarna FS 309 14″ Walk-Behind Gas Concrete Saw

The FS 300-series includes lightweight and compact floor saws. These saws are ideal for small repair jobs and are very easy to handle. They can be transported in any small vehicle.
Utilizes 14″ blade, available for rental or purchase
$42.50/2 hours, $85/day
Blade rental $14.50/day plus usage

10 walk behind saw

10″ Walk-Behind Electric Concrete Saw

Requires purchase or rental of 10″ blade
$56/4 hours, $85/day

te3000

Hilti TE 3000-AVR Heavy-Duty Electric Jackhammer

Exceptionally powerful breaker for heavy-duty concrete demolition, asphalt cuttting, earthwork, and driving ground rods.
Demolition power comparable to 90 lb air-powered breakers.
Must use Hilti TE-H tooling.
Includes pointed and flat chisel.
Weighs 59.7 lbs.
Includes trolley
$60/4 hours, $100/day

11335k bosch

Bosch 1-1/8″ Demo Hammer/Paving Breaker

22 ft-lbs impact energy
Weighs 38 lbs.
1-1/8″ Bosch hex steel or air steel bits
Diamond Pier bit available
$40/4 hours, $80/day

bosch brute

Bosch Brute Paving Breaker

35 ft-lbs impact energy
Weighs 63 lbs.
Operates on 115/120 VAC, 15 amp
Includes moil point and narrow chisel bits
Additional bits available for rent
$40/4 hours, $80/day

bosch demo hammer

Bosch SDS Demo Hammer

Variable-speed dial for controlled chipping applications
Constant Response circuitry provides soft-start, maintains constant speed under load
Vario-Lock positioning allows chisel to be rotated into 12 different positions to optimize work angles
$35/ 4 hours, $50/day

bosch hammer drill

Bosch Spline Drive Hammer Drill

Selectable rotary hammer or hammer-only mode
6.5 ft-lbs impact energy
Weighs 15.1 lbs.
Max bit size available is 1-3/4″ x 16″
$27/3 hours, $45/day

wacker paving breaker

Wacker Gas Paving Breaker

40.5 ft-lbs impact energy
Weighs 50 lbs.
Premix fuel included
Includes moil point and narrow chisel bits
Additional bits available for rent
$60/4 HOURS, $100/DAY

pneumatic paving breaker

Pneumatic Paving Breaker

Pneumatic Paving Breaker has 3/4″ Chicago-style fitting
60- or 90-lbs class
Includes moil point and narrow chisel bits
Additional bits available for rent
$60/day

power trowel scaled

Trowel, Power 36″ 5 ½ hp

$60/day

conc tool display scaled

Trowel, Brick/Block 11″ – $4.25/day
Trowel, Margin – $4.25/day
Trowel, Edger 6″x3″ 1/2″ Round – $4.25/day
Trowel, Bronze Edger – $6/day
Trowel, Edger, Steel 6″x3″ 1/2″ Straight – $4.25/day
Trowel, Sidewalk Groover – $4.25/day
Trowel, Bronze Groover – $6/day
Trowel, Finish Steel 14″x14″ – $4.25/day
Trowel, Finish Steel 16″x4″ – $4.25/day
Trowel, Finish Steel 12″x4″ – $4.25/day
Trowel, 30″ Darby Magnesium – $6/day
Trowel, 45″ Mahogany Darby – $6/day
Trowel, Fresno – $10/day
Trowel, Magnesium Float 16″x3″ – $4.25/day
Trowel, Bull Float, 8″x48″ Standard – $12/day
Trowel, Bull Float 8″x48″ Twist – $13/day

husqvarna screed

12′ Magnesium Manual Screed – $20/day
14’ Magnesium Manual Screed – $24/day

Screed Power Unit – $65/day
Screed Bar  6, 8, 12- or 14-foot lengths; $10/day

conc broom

Broom, 12″ Curb and Step – $4.25/day
Broom, Finish 36″ Concrete – $8.00/day
Broom, Finish 48″ Concrete – $10.00/day

Handle, Bull Float Standard – $2.50/day
Handle, Bull Float Snap Lock – $2.75/day
Handle, Bull Float Adapter Male – $6.05/day
Handle, Bull Float Adapter Female – $6.05/day

power buggy

Power Buggy

16 cu ft bucket
2500 Lbs. payload
$100/4 HOURS, $150/DAY

jackson wheelbarrow

Wheelbarrow, 6 cu ft

$14/day

icf bracing

Giraffe 10′

Priced per brace; generally rented in bunks of 24, which requires a trailer for transportation
$4.66/day

mk wet brick

14″ MK Wet Brick and Stone Saw

14″ Wet Brick Saw
$68/DAY

mk dry brick

14″ MK Dry Brick and Stone Saw

14″ Dry Brick Saw
$55/day

brick splitter

Bon Tool Brick Splitter

$25.41/day

edco surface grinder

Edco Surface Grinder

For leveling, smoothing, cleaning, thin coat removal, and preparing surfaces
Available with two cutting inserts:
– DYMA-Serts for grinding ($145.20/day rental)
– Strip-Serts for stripping coatings from concrete ($80.97/set purchase)
160 CFM vacuum available for $55/day
$75/day

edco planer

Edco Concrete Planer

Removes material from the concrete surface
$266.20/day

Pencil Vibrator – $44.25/day
Concrete Placer – $8.50/day
Rebar Cutter/Bender – $26.50/day
Rebar Wire Twister – $6/day